 |
The 50" VS-50PEF70S LED Projection Cube is ideal for video wall displays in control rooms, emergency operation centers, or public information displays. With service access completely through the front screen, the cube is the ideal selection for your video wall when space is an issue. The ultra high resolution SXGA+ projection cubes feature built-in automatic functions that ensure crystal clear images, consistent color and brilliance, and work-horse durability.
Intelligent SXGA+ LED Projection Cube Features
The 2nd generation LEDs used in the VS-50PEF70S optical engine ensure true color accuracy. Using LED tuned Dynamic Brightness Balancing and Color Space Control on each specific LED, the VS-50PEF70S is sure to maintain color and brightness uniformity for the 50,000 hour LED lifetime. Dynamic Brightness Balancing and Color Space Control immediately adjust cube color and brightness to blend each projection cube with the entire video wall.
Flexibility
Front service access and three optional input ports mean you can install your display wall in virtually any space. If you’re using XGA projection cubes or lamp based systems and now want to upgrade to SXGA+ LED based, the process is fast, easy, and cost-effective with minimal downtime. XGA and SXGA+ as well as lamp based and LED based systems share cabinets and screens as well as the same powerful Texas Instruments DLP® technology, so you only have to replace engines while the remainder of your wall stays in place.
Internal Processing
The SXGA+ projection cubes integrate simplified internal processing, so you may not require an external image processor. Internal data processing allows each cube up to six windows, which can be stretched across the video wall. You can move multiple windows freely and, when using Mitsubishi D-Wall Software, control the system with an intuitive graphical user interface.
Auto-balancing
Continuous color and brightness balancing provides uniformity across the SXGA+ video wall, without the need for external sensors, PC’s, or user intervention. Each VS-50PEF70S LED Projection Cube continuously monitors output with three color sensors and a dynamic color control and brightness balancing system. Sharing this data among adjacent SXGA+ projection cubes, the system automatically adjusts itself for correct color balance and brightness over the entire video wall.
Easy Set-up
We've simplified set-up with the Mitsubishi Auto-Geometry mechanical adjustment function. Each VS-50PEF70S LED Projection Cube uses a fine-tuning device with a camera and machine-vision software to automatically align the image on the screen. Automatic color adjustment is also available using Mitsubishi Wallaby Software.
Durability
The new, 2nd generation LED light source gives you 50,000 hours of constant use. Other moving parts such as the fan pack are rated to last over 100,000 hrs providing over eleven years of continuous operation; that's almost twice as long as display cubes from other manufacturers. Mitsubishi SXGA+ projection screens are powered by durable Texas Instruments DLP® technology.
Redundancy
The Smart Switch in every VS-50PEF70S LED Projection Cube ensures the redundancy you require for mission critical applications and continuous operation. If a signal is unexpectedly lost, the display cube automatically switches to an alternative signal source within seconds. You experience minimal downtime while saving time and money.
|
|
Broadcast
Command and Control
Emergency Operations Centers
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® technology (0.95” DLP® 1 chip)
DarkChip3™ , BrilliantColor™ |
| Brightness |
540 cd/m2 |
| Light Output |
|
| Native Resolution |
1400 x 1050 (SXGA+) |
| Screen Size |
50” diagonal viewable |
| Contrast Ratio |
1500:1 |
| Pixel Clock Rate |
25MHz – 162MHz |
| Viewing Angle |
Horizontal 178° (1/2 gain +/- 36°) Vertical 60° (1/2 gain +/- 10°) |
| Mullion Size |
0.2mm - 1.0mm |
| Interface |
| RGB Input Scanning Frequency |
VGA (640 x 480) – WUXGA (1920 x 1200) Horizontal: 31.5kHz – 92kHz Vertical: 49Hz – 85Hz |
| Optional Input Signals (x3 slots) |
VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2)
VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2)
VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1)
VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC) |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1 |
| Lamp |
| Lamp Type |
LED (RGB) |
| Estimated Lamp Life |
80,000 Hrs |
| Physical |
| Weight |
159 lbs |
| Dimensions (WxHxD) |
40" x 40" x 24.8" |
| Power Consumption |
350W |
| Voltage Range |
AC 100 - 240V +/-10% , 50/ 60Hz +/-1Hz |
| Thermal Dissipation |
301kcal/h (1194BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-86°F; (10-30°C) 20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing |
| Safety Approval |
UL60950-1, CSAC22.2No.60950-1, EN60950-1, K60950-1, AS60950-1, GB4943 |
| EMC |
FCC part15 Subpart B Class A, ICES-003 Issue No.4 Class A, EN55022 Class A, EN55024,EN61000-3-2, EN61000-3-3, K00022 Class A, K00024,AS/NZS CISPR 22 Class A, GB9254 Class A, GB17625.1 |
| Service and Support |
| 2-Year Limited Parts and Labor Warranty
2-Year Limited Original LED pack Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Front Access |
| The front access cube employs a unique mechanism that allows the display cubes to be placed against a wall, eliminating the need for service access space behind the display. The screen swings open allowing all access for installation, wiring and service to be done through the front of the unit. This reduces the footprint required for the display wall, allowing maximum use of space in the control room. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
