 |
Mitsubishi’s VS-50PH50U Projection Cube is the perfect choice when your control room requires a space-saving video wall solution with a high pixel density. This ultra high resolution 50” SXGA+ video wall cube is designed for 24 hour, 7 day a week operation, displaying your data clearly with Mitsubishi’s durable DLP® engine.
Proprietary Mitsubishi features ensure that the VS-50PH50U Projection Cube will maintain uniform brightness and color throughout the control room video wall. Mitsubishi’s Dynamic Brightness Balancing™ feature monitors the brightness in each VS-50PH50U Projection Cube, adjusting them individually as required to ensure equal brightness on the display. Smart Lamp™ and Smart Colorwheel™ maintain color uniformity on the control room video wall. Each lamp and color wheel stores its own color characteristics internally, and when either is replaced the function activates, recalibrating the cube into perfect color balance with the control room video wall.
The VS-50PH50U Projection Cube is a rear accessible model that offers the advantage of small 1mm seams between screens. It requires a minimum amount of space behind the video wall for service access. To help identify issues quickly the VS-50PH50U Projection Cube employs a simple, on-screen diagnostic tool that helps to identify the service issue. Most repairs can be completed with minimal down time.
Installation and service time can be greatly reduced through the optional motorized adjustment tool. It allows remotely operated mechanical adjustments to the image geometry. This time-saving device enables a single technician to make the slightest adjustments to the 6-axis adjuster, creating precise image alignment between the control room video wall cubes.
|
|
Broadcast
Command and Control
Emergency Operations Centers
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® chip (0.95”, 12° single chip) |
| Brightness |
Bright: 1000 cd/m² (typical); 292 ft.-L (typical);
Normal: 800 cd/m² (typical); 234 ft.-L (typical) |
| Light Output |
Bright: 700 ANSI Lumens; Normal: 560 ANSI Lumens |
| Native Resolution |
1400 x 1050 pixels (SXGA+) |
| Screen Size |
50” diagonal viewable (1270 mm) |
| Contrast Ratio |
1800:1 (typical) |
| Pixel Clock Rate |
25 - 122 MHz |
| Viewing Angle |
Horizontal: 160°; Vertical: 60°(typical) |
| Mullion Size |
0.2 mm - 1.0 mm (*) |
| Interface |
| RGB Input Scanning Frequency |
VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 78.0 kHz; Vertical: 49 - 85 Hz |
| Analog RGB Input Signal |
5 BNC (RGBHV) x1
Video: 0.7Vp-p positive/75 ohms;
Synchronous: TTL level (positive/negative),
High Level: 2.5-5.0V; Low Level: 0-0.5V;
Sync On Green: Video: 0.7Vp-p positive;
Synchronous: 0.3Vp-p negative |
| Digital RGB Input Signal |
TMDS (DVI-D) x1 |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;
Wired Remote: F3.5 Jack; IR Receiver |
| Lamp |
| Lamp Type |
High pressure mercury lamp 100W/120W |
| Estimated Lamp Life |
10,000 hours/6,000 hours |
| Physical |
| Weight |
140 lbs. (64 kg) |
| Dimensions (WxHxD) |
40.0 x 38.5 x 25.2” (1016 x 977 x 639 mm) |
| Power Consumption |
195/195W |
| Voltage Range |
AC 100-240V ±10%, 50/60Hz ±1 Hz |
| Thermal Dissipation |
167.7 kcal/h (665.5 BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-95°F; (10-35°C)
20-80% non-condensing
Condition at Storage: -4-122°F; (-20-50°C)
20-80% non-condensing |
| Safety Approval |
UL60950, CSA22.2 No. 60950, EN60950, CNS14336 |
| EMC |
FCC Part 15 Class A, Idustry Canada Class A, EN55022
Class A, EN55024, EN61000-3-2, EN61000-3-3, GB9254
GB17625.1, KN22 (CISPR Pub.22) Class A, KN24 (CISPR
Pub.24), CNS13438 Class A |
| Service and Support |
2-Year Limited Parts and Labor Warranty, excludes lamp.
1-Year Limited Original Lamp Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Smart Lamp |
| Mitsubishi's exclusive Smart Lamp™ Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Smart Colorwheel |
| Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
