 |
The 50” VS–50XH70S Projection Cube with rear accessibility is designed for the control room that has additional service space behind the video wall. Made with most the advanced Mitsubishi technology to–date, the VS–50XH70S Projection Cube built–in features automatically self–adjusts for a consistently superior display wall experience. Vivid images, minimal and cost–effective maintenance, and twice the service life than anything else on the market make the VS–50XH70S Projection Cube your best solution for mission critical applications.
Intelligent XGA Projection Cube FeaturesDeveloped for continual use, the VS–50XH70S Projection Cube delivers consistent, and uniform performance under 24/7 operation. When a lamp is near the end of its service life, the Smart Lamp automatically switches to a pre–heated replacement lamp and the Color Space Control function adjusts cube color and brilliance to blend with the entire video wall. The Digital Gradation Circuit ensures uniform brightness distribution and crisp, vivid images edge to edge.
FlexibleWe build projection cubes with flexibility in mind. Easy for you to upgrade, XGA and SXGA+ share the same cabinets, mirrors and screens, and are powered by sharp DLP® technology by Texas Instruments. Your upgrades are fast with minimal disruption to normal operations. Three optional input ports and thirty–eight possible product configurations allow you to install cubes in virtually any space to meet any operational requirement.
Internal ProcessingSimplified image processing means that you may not require an external image processor. Internal data processing allows up to six windows per cube which can be resized across the entire wall. You can move multiple windows freely and, when using Mitsubishi D–Wall Software, control the system from a user–friendly graphical user interface.
Automatically BalancedBuilt–in primary color sensors in each cube continually monitor output, share the information with adjacent units, and automatically adjust overall performance of the entire video wall. Extremely accurate color balance and brightness ensure uniform multi–screen imagery, with virtually no external action or devices required.
Easily to InstallThe Mitsubishi Auto–Geometry function provides simplified mechanical adjustments. A camera and machine–vision software align the on–screen image automatically using an optional motorized fine–tuning device installed into each cube. This enables automatic six–axis mechanical modification as well as mirror and screen adjustment. Automatic color alteration is also available using Mitsubishi Wallaby Software.
DurableThe VS–50XH70S Projection Cube gives you over eleven years of service life, almost twice that of display cubes from other manufacturers. The color wheel system, fan pack, and other moving parts deliver an average of 100,000 hours of continuous operation.
RedundantMission critical, continuous operation requires reliable signal redundancy and the VS–50XH70S Projection Cube delivers. If a signal is unexpectedly lost, the display cube automatically switches to an alternative signal source within seconds. Downtime is minimal, saving you time and money.
|
|
Command and Control
Emergency Operations Centers
Public Information
Security
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® chip (0.7”, 12° single chip) |
| Brightness |
Bright: 1150 cd/m² Normal: 1010 cd/m² |
| Light Output |
Bright: 860ANSI Lumen Normal: 760ANSI Lumen |
| Native Resolution |
1024 x 768 (XGA) |
| Screen Size |
50” diagonal viewable |
| Contrast Ratio |
2200:01:00 |
| Pixel Clock Rate |
25MHz 162MHz |
| Viewing Angle |
Horizontal: 180° Vertical: 60° |
| Mullion Size |
0.2mm - 1.0mm |
| Interface |
| RGB Input Scanning Frequency |
VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 92.0 kHz; Vertical: 49 - 85 Hz |
| Optional Input Signals (x3 slots) |
VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2)
VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2)
VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1)
VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC) |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1 |
| Lamp |
| Lamp Type |
Standard 132/150W |
| Estimated Lamp Life |
10,000 hours (Normal mode) 6,000 hours (Bright mode) |
| Physical |
| Weight |
154 lbs. |
| Dimensions (WxHxD) |
40” x 40” x 24.8” |
| Power Consumption |
230W @ 132W, 260W @ 150W, 420W max. (During the auto-lamp exchange) |
| Voltage Range |
AC 100 240V +/-10% , 50/ 60Hz +/-1Hz |
| Thermal Dissipation |
223.6kcal/h (887BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-95°F; (10-30°C)
20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing |
| Safety Approval |
UL60950-1, CSAC22.2No.60950-1, EN60950-1, AS60950-1, GB4943 |
| EMC |
FCC part15 Subpart B Class AICES-003 Issue No.4
Class AEN55022 Class A, EN55024EN61000-3-2,
EN61000-3-3K00022 Class A, K00024AS/NZS CISPR 22 Class AGB9254 Class A, GB17625.1 |
| Service and Support |
2-Year Limited Parts and Labor Warranty, excludes lamp.
1-Year Limited Original Lamp Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Smart Lamp |
| Mitsubishi's exclusive Smart Lamp™ Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Smart Colorwheel |
| Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
