VS-50XHF70S

Front Access Projection Cube

Size:		50” diagonal viewable
Resolution:		1024 x 768 (XGA)
Type:		Front Access Projection Cube

Overview

Specifications

Features & Benefits

Accessories

Resources

The 50” VS-50XHF70S Projection Cube solves configuration issues in your control room when space is limited. Completely serviceable through the front screen, you can install the XGA projection cubes directly against a back wall with zero clearance. Built-in features keep the display screen sharp, consistent, and easy for you to maintain for more than a decade of continuous operation.

Intelligent XGA Projection Cube Features

Smart Lamp technology ensures consistent, uniform image and twenty-four hours a day operation. The XGA projection cubes continuously communicate, making adjustments as needed with Color Space Control. The Smart Lamp detects fading near the end of lamp service life and automatically and switches to a second pre-heated lamp. The cube quickly adjusts to maintain consistent color and brilliance across the video wall.

Flexibility

Modular and easy for you to upgrade, XGA shares the same cabinet and screen with SXGA+ and both are powered by Texas Instruments DLP® technology. The cabinets, mirrors and screens remain in place and just the engine is replaced, eliminating long periods of down time during the upgrade. No additional construction is necessary.

Internal Processing

Internal data processing allows up to six windows per cube and windows can be moved and resized across the video wall. With such simplified image processing, you may not require an external image processor for your installation. Multiple windows can be moved freely throughout the video wall display. When used in combination with Mitsubishi D-Wall Software, you can control the entire image system from an intuitive graphical user interface.

Auto-balancing

Each display cube features three built-in primary color sensors and a dynamic color control and brightness balancing system for optimal blend and brilliance. The sensors continually monitor cube output, share data with adjacent units, and automatically adjust for accurate color balance and brightness across the entire system. Virtually no external action, sensors, or PC’s are required to maintain multi-screen uniformity.

Easy Set-Up

The Mitsubishi Auto-Geometry function provides simplified mechanical adjustments. Using a motorized fine-tuning device installed in each cube uses a camera and machine-vision software automatically align the image on screen. This enables automatic six-axis mechanical modifications as well as mirror and screen adjustments. Automatic color alteration is also available with Mitsubishi Wallaby Software.

Durability

We’ve doubled the service life of the color wheel system, fan pack, and other moving parts. That’s over 100,000 hours, or eleven years of continuous operation for your control room, almost twice as long as cubes from other manufacturers. The color wheel internally stores its own color characteristics. When the color wheel is replaced, this function automatically recalibrates the cube into perfect color balance consistent with the rest of your video wall.

Redundancy

The VS-50XHF70S Projection Cube delivers the signal redundancy you need for mission critical applications and continual operation. Should a signal be suddenly lost, within seconds the Smart Switch function automatically switches to an alternate signal source. You experience minimal downtime, which saves you time and money.

Recommended Market

Command and Control
Emergency Operations Centers
Public Information
Security
Telecommunications
Transportation
Utilities

Specifications

Display
Display Technology	DLP® chip (0.7”, 12° single chip)
Brightness	Bright: 1150 cd/m² Normal: 1010 cd/m²
Light Output	Bright: 860ANSI Lumen Normal: 760ANSI Lumen
Native Resolution	1024 x 768 (XGA)
Screen Size	50” diagonal viewable
Contrast Ratio	2200:01:00
Pixel Clock Rate	25MHz 162MHz
Viewing Angle	Horizontal: 180° Vertical: 60°
Mullion Size	0.2mm - 1.0mm

Interface
RGB Input Scanning Frequency	VGA (640x480) - SXGA+ (1400x1050) Horizontal: 31.5 - 92.0 kHz; Vertical: 49 - 85 Hz
Optional Input Signals (x3 slots)	VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1) VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2) VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2) VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1) VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC)
Control Signal Input	RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2 (input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1

Lamp
Lamp Type	Standard 132/150W
Estimated Lamp Life	10,000 hours (Normal mode) 6,000 hours (Bright mode)

Physical
Weight	154 lbs.
Dimensions (WxHxD)	40” x 40” x 28.2”
Power Consumption	230W @ 132W, 260W @ 150W, 420W max. (During the auto-lamp exchange)
Voltage Range	AC 100 240V +/-10% , 50/ 60Hz +/-1Hz
Thermal Dissipation	223.6kcal/h (887BTU/h)

Other
Temperature and Humidity	Condition at Operation: 50-95°F; (10-30°C) 20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing
Safety Approval	UL60950-1, CSAC22.2No.60950-1, EN60950-1, AS60950-1, GB4943
EMC	FCC part15 Subpart B Class AICES-003 Issue No.4 Class AEN55022 Class A, EN55024EN61000-3-2, EN61000-3-3K00022 Class A, K00024AS/NZS CISPR 22 Class AGB9254 Class A, GB17625.1

Service and Support
2-Year Limited Parts and Labor Warranty, excludes lamp. 1-Year Limited Original Lamp Warranty. (*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity.

Features		Benefits
Front Access		The front access cube employs a unique mechanism that allows the display cubes to be placed against a wall, eliminating the need for service access space behind the display. The screen swings open allowing all access for installation, wiring and service to be done through the front of the unit. This reduces the footprint required for the display wall, allowing maximum use of space in the control room.
Color Space Control		Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration.
Smart Lamp		Mitsubishi's exclusive Smart Lamp Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs.
Smart Colorwheel		Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs.
Dynamic Brightness Balancing		Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall.
12 Bit Dither & Gamma Circuit		Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images.
Digital Gradation Circuit		Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations.
High Contrast Ratio		The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors.

For more information on accessories,
please call 1-800-769-1268 to order.

Available Accessories

Type		Part Number
Motorized Adjustment Tool		MA-70E
		S-A70E
Remote Control Unit		R-FD10TX
Scaler/Input Card		VC-B70D2
		VC-B70DC
		VC-B70G2
		VC-B70SD1
		VC-B70V2
Spare Lamp		S-70LA