 |
Mitsubishi’s intelligent VS-50XL70S Projection Cube brings vivid clarity, flexibility, and easy-to-use functionality to your control room. Sophisticated, self-adjusting, and low-maintenance, the 50” VS-50XL70S Projection Cube incorporates the latest in advanced display cube technologies to give you a superior video wall experience. Full rear service access makes the display cube ideal when additional service space is available behind the video wall.
Smart XGA Projection Cube FeaturesBuilt for the rigors of mission critical applications and continual use, the XGA projection cubes work together automatically to ensure consistent operation and uniformity. Using Smart Lamp technology, the display cubes communicate and perform Color Space Control adjustments automatically. When a lamp is replaced the cube corrects itself for proper color and brilliance across the video wall. A digital gradation circuit distributes uniform brightness, keeping multi-screen configurations sharp and vibrant images edge to edge.
Fully Flexible and UpgradeableMitsubishi’s VS-50XL70S Projection Cube flexibility allows you to build a video wall to fit your particular needs. XGA cubes share common cabinets and screens with SXGA+ cubes, so you can easily upgrade at a later date by replacing just the engine instead of the entire display wall. Both models are powered by Texas Instruments’ reliable DLP® technology for crisp and clear images. With three optional input ports available, you can configure your XGA projection screens according to your specific requirements.
Built-in ProcessingThe VS-50XL70S Projection Cube’s internal data processing function allows up to six windows per cube and windows which can be stretched across the video wall, so you may not need an external image processor for your installation. Multiple windows can be moved freely and, when used with Mitsubishi D-Wall Software, you can control the entire imaging system intuitively from a user-friendly graphical user interface.
Auto-balancingSelf-adjusting functions maintain multi-screen image uniformity, without the need for external sensors, PC’s, or user intervention. Each cube uses three integrated color sensors and a dynamic color control and brightness balancing system to continually monitor output. Sharing this data among adjacent XGA projection cubes, the system automatically adjusts itself for accurate color balance and brightness over the entire display wall.
Easy Set-upThe Mitsubishi Auto-Geometry function provides simplified mechanical adjustments for easy installation. Each VS-50XL70S Projection Cube uses a fine-tuning device with a camera and machine-vision software to align the image on the screen automatically. Automatic color adjustment is also available using Mitsubishi Wallaby Software.
DurabilityWe’ve doubled the average service life of the color wheel system, fan pack and other moving parts, giving you over 100,000 hours of constant use. That’s more than eleven years of continuous operation, almost twice as long as display cubes made by other manufacturers. Throughout operation, each display cube color wheel internally stores its own color characteristics. When you replace a color wheel or a lamp, this built-in function automatically recalibrates the cube into perfect and consistent color balance with the rest of the video wall.
RedundancyThe Mitsubishi Smart Switch delivers the signal redundancy you need for mission critical applications and continuous, 24/7 operation. If a signal is unexpectedly lost, the display cube automatically switches to an alternative signal source within seconds. You experience minimal downtime while saving time and money.
|
|
Emergency Operations Centers
Public Information
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® chip (0.7”, 12° single chip) |
| Brightness |
Bright: 1150 cd/m² Normal: 1010 cd/m² |
| Light Output |
Bright: 860ANSI Lumen Normal: 760ANSI Lumen |
| Native Resolution |
1024 x 768 (XGA) |
| Screen Size |
50” diagonal viewable |
| Contrast Ratio |
2200:01:00 |
| Pixel Clock Rate |
25MHz 162MHz |
| Viewing Angle |
Horizontal: 180° Vertical: 60° |
| Mullion Size |
0.2mm - 1.0mm |
| Interface |
| RGB Input Scanning Frequency |
VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 92.0 kHz; Vertical: 49 - 85 Hz |
| Optional Input Signals (x3 slots) |
VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2)
VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2)
VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1)
VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC) |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1 |
| Lamp |
| Lamp Type |
Standard 132/150W |
| Estimated Lamp Life |
10,000 hours (Normal mode) 6,000 hours (Bright mode) |
| Physical |
| Weight |
154 lbs. |
| Dimensions (WxHxD) |
40” x 40” x 24.8” |
| Power Consumption |
230W @ 132W, 260W @ 150W |
| Voltage Range |
AC 100 240V +/-10% , 50/ 60Hz +/-1Hz |
| Thermal Dissipation |
223.6kcal/h (887BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-95°F; (10-30°C)
20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing |
| Safety Approval |
UL60950-1, CSAC22.2No.60950-1, EN60950-1, AS60950-1, GB4943 |
| EMC |
FCC part15 Subpart B Class AICES-003 Issue No.4
Class AEN55022 Class A, EN55024EN61000-3-2,
EN61000-3-3K00022 Class A, K00024AS/NZS CISPR 22 Class AGB9254 Class A, GB17625.1 |
| Service and Support |
2-Year Limited Parts and Labor Warranty, excludes lamp.
1-Year Limited Original Lamp Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Smart Lamp |
| Mitsubishi's exclusive Smart Lamp™ Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Smart Colorwheel |
| Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
