 |
When space is a premium, the 50” VS-50XLF70S Projection Cube is an ideal solution for your control room. These front access XGA projection cubes are designed to be pushed against a back wall with zero clearance and are completely serviceable through the front screen. VS-50XLF70S Projection Cube built-in features make the display screen exhibit sharp, consistent images and low-maintenance.
Intelligent XGA Projection Cube FeaturesThe VS-50XLF70S Projection Cube is designed for continual use with features that give you consistent, uniform 24-hour operation throughout the year. Smart Lamp technology allows the display cubes to communicate with each other and performs automatic Color Space Control adjustments. When you replace a lamp, the cube immediately adjusts itself to maintain consistent color and brilliance across the video wall.
Modular and UpgradeableThe XGA and the SXGA+ cubes share common cabinets and screens, so should you decide to upgrade your XGA projection cubes, the switch-over process is simple and cost effective. The cabinets, mirrors and screens remain in place and just the engine is replaced, eliminating long periods of down time during the upgrade. No additional construction is necessary.
Internal Data ProcessingBuilt-in processing allows up to six windows per cube and windows can be resized across multiple cubes. Multiple windows are moveable and three input port options let you configure the display cubes to meet your specific video wall needs. Depending on your application, an external image processor may not be required for your installation. Multiple windows can be moved and resized freely. Mitsubishi D-Wall Software lets you control the entire imaging system with an intuitive graphical user interface.
Auto-balancingThe VS-50XLF70S Projection Cube automatically adjusts color and brightness for uniformity across the entire display wall. Each cube monitors its own output with three built-in color sensors and a dynamic color control and balancing system. Adjacent XGA projection cubes share data and self-correct to maintain accurate color balance and brightness over the entire wall.
Easy InstallationSet-up is easy with simplified mechanical adjustments made by the Mitsubishi Auto-Geometry function. Screen image aligns automatically using a fine-tuning device with a camera and machine-vision software. Automatic color adjustment is also available using Mitsubishi Wallaby Software.
Durable and Long-lastingOur display cubes now have a service life almost twice that of cubes from other manufacturers. The VS-50XLF70S Projection Cube color wheel system, fan pack and other moving parts are rated at 100,000 hours, or more than eleven years. The lamp and the color wheel internally stores their own color characteristics and, when replaced, automatically recalibrates the cube for color balance consistent with the rest of the video wall. Texas Instruments’ durable DLP® technology gives you crisp imaging every time.
Signal RedundancyIf a signal is suddenly lost, the Smart Switch changes to an alternative signal source in a matter of seconds so you experience very little downtime. It’s this kind of detail that saves you time and money for mission critical, continuous operations.
|
|
Emergency Operations Centers
Public Information
Security
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® chip (0.7”, 12° single chip) |
| Brightness |
Bright: 1150 cd/m² Normal: 1010 cd/m² |
| Light Output |
Bright: 860ANSI Lumen Normal: 760ANSI Lumen |
| Native Resolution |
1024 x 768 (XGA) |
| Screen Size |
50” diagonal viewable |
| Contrast Ratio |
2200:01:00 |
| Pixel Clock Rate |
25MHz 162MHz |
| Viewing Angle |
Horizontal: 180° Vertical: 60° |
| Mullion Size |
0.2mm - 1.0mm |
| Interface |
| RGB Input Scanning Frequency |
VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 92.0 kHz; Vertical: 49 - 85 Hz |
| Optional Input Signals (x3 slots) |
VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2)
VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2)
VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1)
VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC) |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1 |
| Lamp |
| Lamp Type |
Standard 132/150W |
| Estimated Lamp Life |
10,000 hours (Normal mode) 6,000 hours (Bright mode) |
| Physical |
| Weight |
154 lbs. |
| Dimensions (WxHxD) |
40” x 40” x 28.2” |
| Power Consumption |
230W @ 132W, 260W @ 150W |
| Voltage Range |
AC 100 240V +/-10% , 50/ 60Hz +/-1Hz |
| Thermal Dissipation |
223.6kcal/h (887BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-95°F; (10-30°C)
20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing |
| Safety Approval |
UL60950-1, CSAC22.2No.60950-1, EN60950-1, AS60950-1, GB4943 |
| EMC |
FCC part15 Subpart B Class AICES-003 Issue No.4
Class AEN55022 Class A, EN55024EN61000-3-2,
EN61000-3-3K00022 Class A, K00024AS/NZS CISPR 22 Class AGB9254 Class A, GB17625.1 |
| Service and Support |
2-Year Limited Parts and Labor Warranty, excludes lamp.
1-Year Limited Original Lamp Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Front Access |
| The front access cube employs a unique mechanism that allows the display cubes to be placed against a wall, eliminating the need for service access space behind the display. The screen swings open allowing all access for installation, wiring and service to be done through the front of the unit. This reduces the footprint required for the display wall, allowing maximum use of space in the control room. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Smart Lamp |
| Mitsubishi's exclusive Smart Lamp Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Smart Colorwheel |
| Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
