 |
The 67” VS-67XL70S Projection Cube offers a large XGA resolution screen and rear accessibility for control rooms with additional service space behind the video wall. Using the latest Mitsubishi advanced technology, the built-in features give you a superior video wall experience. Colors and brightness remain vivid and balanced, automatically
Intelligent XGA Projection Cube FeaturesDesigned specifically for mission critical applications, the VS-67XL70S Projection Cube built-in intelligent features ensure continuous high performance operation. Smart Lamp technology enables display cubes to communicate and maintain uniformity using the Color Space Control function, without external direction. When a lamp is replaced, the cube automatically adjusts itself for consistent color and brilliance across the entire video wall. The Digital Gradation Circuit maintains uniform brightness and keeps multi-screen configurations sharp and vibrant.
FlexibleIf you decide to upgrade to SXGA+, the process is easy and requires minimal downtime. Texas Instruments’ durable DLP® technology powers both the XGA and SXGA+ models, which share the same cabinets, mirrors and screens. Three input port options also let you configure your system to fit your control room requirements.
Internal ProcessingVS-67XL70S Projection Cube internal data processing allows up to six windows per cube and windows can be resized and stretched across the video wall, so you may not need an external image processor for your installation. You can move multiple windows freely and, using Mitsubishi D-Wall Software, control the entire system from an intuitive graphical user interface.
Auto-balancingColor sensors and dynamic Color Space Control installed in each cube continually monitor output and share the data among adjacent XGA projection cubes. The system automatically adjusts itself for color balance and brightness over the entire display wall.
Easy Set-upMitsubishi Auto-Geometry makes set-up easy and hassle-free with simplified mechanical adjustments. Each VS-67XL70S Projection Cube features a fine-tuning device that uses a camera and machine-vision software to align the screen image automatically. You can also opt for the automatic color adjustment with Mitsubishi Wallaby Software.
DurabilityOur display cubes now have a service life almost twice that of other manufacturers’ cubes. The VS-67XL70S Projection Cube color wheel system, fan pack and other moving parts rate to 100,000 hours, or more than eleven years. The color wheel internally stores its own color characteristics and when replaced, the new color wheel automatically recalibrates the cube for color balance consistent with the rest of the video wall all through Texas Instruments DLP® technology which gives you consistently crisp imaging.
RedundancyMission critical, continuous operation requires signal redundancy and the VS-50XH70S Projection Cube delivers. If a signal is unexpectedly lost, the display cube automatically switches to an alternative signal source within seconds. Downtime is minimal, saving you time and money.
|
|
Broadcast
Command and Control
Emergency Operations Centers
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® chip (0.7”, 12° single chip) |
| Brightness |
Bright: 640 cd/m² Normal: 560 cd/m² |
| Light Output |
Bright: 860ANSI Lumen Normal: 760ANSI Lumen |
| Native Resolution |
1024 x 768 (XGA) |
| Screen Size |
67” diagonal viewable |
| Contrast Ratio |
2200:01:00 |
| Pixel Clock Rate |
25MHz 162MHz |
| Viewing Angle |
Horizontal: 180° Vertical: 60° |
| Mullion Size |
0.2mm - 2.0mm |
| Interface |
| RGB Input Scanning Frequency |
VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 92.0 kHz; Vertical: 49 - 85 Hz |
| Optional Input Signals (x3 slots) |
VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2)
VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2)
VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1)
VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC) |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1 |
| Lamp |
| Lamp Type |
Standard 132/150W |
| Estimated Lamp Life |
10,000 hours (Normal mode) 6,000 hours (Bright mode) |
| Physical |
| Weight |
231 lbs. |
| Dimensions (WxHxD) |
53.6” x 51.4” x 31.4” |
| Power Consumption |
230W @ 132W, 260W @ 150W |
| Voltage Range |
AC 100 240V +/-10% , 50/ 60Hz +/-1Hz |
| Thermal Dissipation |
240.8kcal/h (956BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-95°F; (10-30°C)
20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing |
| Safety Approval |
UL60950-1, CSAC22.2No.60950-1, EN60950-1, AS60950-1, GB4943 |
| EMC |
FCC part15 Subpart B Class AICES-003 Issue No.4
Class AEN55022 Class A, EN55024EN61000-3-2,
EN61000-3-3K00022 Class A, K00024AS/NZS CISPR 22 Class AGB9254 Class A, GB17625.1 |
| Service and Support |
2-Year Limited Parts and Labor Warranty, excludes lamp.
1-Year Limited Original Lamp Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Smart Lamp |
| Mitsubishi's exclusive Smart Lamp™ Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Smart Colorwheel |
| Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
