 |
The VS-67XLF70S Projection Cube with 100% front service access solves the problem of limited space in the control room. Designed to accommodate zero clearance, the 67” XGA projection cubes install directly against a back wall. Built-in advanced technology keeps the display sharp and consistent across the video wall for worry-free operation and easy maintenance.
Intelligent XGA Projection Cube FeaturesDesigned for continual use, the high resolution VS-67XLF70S Projection Cube self-adjusts to keep your screens consistent over the entire wall. XGA projection cubes communicate uses Smart Lamp technology, which monitors output and makes automatic Color Space Control adjustments. When you replace a lamp, the cube immediately adjusts itself to maintain color and brilliance consistent with the rest of the display units.
FlexibilityIf you ever want to upgrade to SXGA, the modular design makes the switch easy with minimal downtime. Texas Instruments DLP® technology supplies the muscle behind both XGA and SXGA+ models, which also share the same cabinets and screens. To upgrade, you simply replace the engine instead of the entire display wall.
Internal ProcessingThe VS-67XLF70S Projection Cube has three input port options, so you can configure your XGA projection cubes to fit your control room requirements. Internal data processing lets you configure up to six windows per cube and windows can be resized across the video wall, so you may not need an external image processor for your installation. Move multiple windows easily and, using Mitsubishi D-Wall Software, control the entire system from an intuitive graphical user interface.
Auto-balancingColor sensors in each XGA projection cube continuously monitor output. Using the dynamic color and brightness balancing system, cubes communicate with adjacent display units and adjust for extremely accurate color balance throughout the video wall. Your system maintains long-term multi-screen uniformity without the need for external sensors, PC’s, or user intervention.
Easy Set-upRevolutionary Mitsubishi Auto-Geometry is installed in each display cube to simplify mechanical adjustments with a camera and machine-driven software that automatically align the screen image. A motorized mechanical adjustment device enables 6-axis mechanical fine-tuning and also adjusts mirrors and screens. Automatic color adjustment is also available when you use Mitsubishi Wallaby software.
DurabilityThe advanced color wheel in each display cube stores its own color characteristics. When it is replaced, the new color wheel immediately recognizes the difference in characteristics and makes adjustments to match the color of the other display cubes. The VS-67XLF70S Projection Cube has a service life of more than eleven years, almost double that of cubes from other manufacturers. The color wheel system, fan pack, and other moving parts operate for an average of up to 100,000 hours of continuous operation.
RedundancyThe Mitsubishi Smart Switch delivers the signal redundancy you need for mission critical applications and continuous, 24/7 operation. If a signal is unexpectedly lost, the display cube automatically switches to an alternative signal source within seconds. You experience minimal downtime while saving time and money.
|
|
Broadcast
Command and Control
Emergency Operations Centers
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® chip (0.7”, 12° single chip) |
| Brightness |
Bright: 640 cd/m² Normal: 560 cd/m² |
| Light Output |
Bright: 860ANSI Lumen Normal: 760ANSI Lumen |
| Native Resolution |
1024 x 768 (XGA) |
| Screen Size |
67” diagonal viewable |
| Contrast Ratio |
2200:01:00 |
| Pixel Clock Rate |
25MHz 162MHz |
| Viewing Angle |
Horizontal: 180° Vertical: 60° |
| Mullion Size |
0.2mm - 2.0mm |
| Interface |
| RGB Input Scanning Frequency |
VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 92.0 kHz; Vertical: 49 - 85 Hz |
| Optional Input Signals (x3 slots) |
VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2)
VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2)
VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1)
VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC) |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1 |
| Lamp |
| Lamp Type |
Standard 132/150W |
| Estimated Lamp Life |
10,000 hours (Normal mode) 6,000 hours (Bright mode) |
| Physical |
| Weight |
231 lbs. |
| Dimensions (WxHxD) |
53.6” x 51.4” x 32.4” |
| Power Consumption |
230W @ 132W, 260W @ 150W |
| Voltage Range |
AC 100 240V +/-10% , 50/ 60Hz +/-1Hz |
| Thermal Dissipation |
240.8kcal/h (956BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-95°F; (10-30°C)
20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing |
| Safety Approval |
UL60950-1, CSAC22.2No.60950-1, EN60950-1, AS60950-1, GB4943 |
| EMC |
FCC part15 Subpart B Class AICES-003 Issue No.4
Class AEN55022 Class A, EN55024EN61000-3-2,
EN61000-3-3K00022 Class A, K00024AS/NZS CISPR 22 Class AGB9254 Class A, GB17625.1 |
| Service and Support |
2-Year Limited Parts and Labor Warranty, excludes lamp.
1-Year Limited Original Lamp Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Front Access |
| The front access cube employs a unique mechanism that allows the display cubes to be placed against a wall, eliminating the need for service access space behind the display. The screen swings open allowing all access for installation, wiring and service to be done through the front of the unit. This reduces the footprint required for the display wall, allowing maximum use of space in the control room. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Smart Lamp |
| Mitsubishi's exclusive Smart Lamp Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Smart Colorwheel |
| Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
