 |
The 80” VS-80PH70B Projection Cube is ideal for video wall displays in control rooms, emergency operation centers, or public information displays. The ultra high resolution SXGA+ projection cubes feature built-in automatic functions that ensure crystal clear images, consistent color and brilliance, and work-horse durability.
Intelligent SXGA+ Projection Cube FeaturesThe Smart Lamp in each display cube detects the fading brightness of a lamp at the end of its service life and switches to the alternate lamp within seconds for minimal downtime. Color Space Control immediately adjusts cube color and brilliance to blend with the entire video wall. The Digital Gradation Circuit automatically adjusts for edge to edge uniform brightness distribution and crisp, vivid images.
FlexibilityEach VS-80PH75B Projection Cube features three optional input ports so you can tailor your display wall to fit your needs. Install your VS-80PH70B Projection Cube video wall in virtually any configuration, up to 3 units high.
Internal ProcessingThe SXGA+ projection cubes integrate simplified internal processing, so you may not require an external image processor. Internal data processing allows each cube up to six windows, which can be stretched across the video wall. You can move multiple windows freely and, when using Mitsubishi D-Wall Software, control the system with an intuitive graphical user interface.
Auto-balancingContinuous color and brightness balancing provides uniformity across the SXGA+ video wall, without the need for external sensors, PC’s, or user intervention. Each VS-80PH70B Projection Cube continuously monitors output with three color sensors and a dynamic color control and brightness balancing system. Sharing this data among adjacent SXGA+ projection cubes, the system automatically adjusts itself for correct color balance and brightness over the entire video wall.
Easy Set-upWe've simplified set-up with the Mitsubishi Auto-Geometry mechanical adjustment function. Each VS-80PH70B Projection Cube uses a fine-tuning device with a camera and machine-vision software to automatically align the image on the screen. Automatic color adjustment is also available using Mitsubishi Wallaby Software.
DurabilityThe color wheel system, fan pack, and other moving parts give you up to 100,000 hours of constant use. With over eleven years of continuous operation, that's almost twice as long as display cubes from other manufacturers. Throughout operation, each display cube color wheel internally stores its own color characteristics. When you replace a color wheel, this built-in function automatically recalibrates the cube into perfect and consistent color balance with the rest of the video wall. Mitsubishi SXGA+ projection screens are powered by durable Texas Instruments DLP® technology.
RedundancyThe Smart Switch in every VS-80PH70B Projection Cube ensures the redundancy you require for mission critical applications and continuous operation. If a signal is unexpectedly lost, the display cube automatically switches to an alternative signal source within seconds. You experience minimal downtime while saving time and money.
|
|
Broadcast
Command and Control
Emergency Operations Centers
Telecommunications
Transportation
Utilities
|
|
|
|
| Display |
| Display Technology |
DLP® chip (0.95”, 12° single chip) |
| Brightness |
Bright: 126 cd/m² Normal: 111 cd/m² |
| Light Output |
Bright: 860ANSI Lumen
Normal: 760ANSI Lumen |
| Native Resolution |
1400 x 1050 (SXGA+) |
| Screen Size |
80” diagonal viewable |
| Contrast Ratio |
2400:1 |
| Pixel Clock Rate |
25MHz 162MHz |
| Viewing Angle |
Horizontal: 180° Vertical: 180° |
| Mullion Size |
0.2mm - 3.0mm |
| Interface |
| RGB Input Scanning Frequency |
VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 92.0 kHz; Vertical: 49 - 85 Hz |
| Optional Input Signals (x3 slots) |
VC-B70G2 - INPUT CARD for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
VC-B70D2 - INPUT CARD for Digital Video Signals (DVI-D x 2)
VC-B70V2 - INPUT CARD for Analog Video Signals (3 BNC x 2)
VC-B70DC - INPUT CARD for Daisy Chain (D-Sub 15 x 1 / DVI-D x 1 / 3 BNC x 1)
VC-B70SD1 - INPUT CARD for SDI Signals (2 BNC) |
| Control Signal Input |
RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;Wired Remote: F3.5 Jack; IR Receiver, LAN RJ45 x1 |
| Lamp |
| Lamp Type |
Standard 132/150W |
| Estimated Lamp Life |
10,000 hours (Normal mode) 6,000 hours (Bright mode) |
| Physical |
| Weight |
286 lbs. |
| Dimensions (WxHxD) |
62.9” x 54.9” x 38.6” |
| Power Consumption |
250W @ 132W, 280W @ 150W, 450W max. (During the auto-lamp exchange) |
| Voltage Range |
AC 100 240V +/-10% , 50/ 60Hz +/-1Hz |
| Thermal Dissipation |
240.8kcal/h (956BTU/h) |
| Other |
| Temperature and Humidity |
Condition at Operation: 50-95°F; (10-35°C) 20-80% non-condensing Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing |
| Safety Approval |
UL60950-1, CSAC22.2No.60950-1, EN60950-1, AS60950-1, GB4943 |
| EMC |
FCC part15 Subpart B Class AICES-003 Issue No.4
Class AEN55022 Class A, EN55024EN61000-3-2,
EN61000-3-3K00022 Class A, K00024AS/NZS CISPR 22 Class AGB9254 Class A, GB17625.1 |
| Service and Support |
2-Year Limited Parts and Labor Warranty, excludes lamp.
1-Year Limited Original Lamp Warranty.
(*) Depending on configuration and environment 1.0 mm recommended for large walls to allow for expansion due to heat and humidity. |
|
|
| |
|
| Dynamic Brightness Balancing |
| Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing™ circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall. |
| Color Space Control |
| Mitsubishi developed the powerful Color Space Control feature, a digital color balancing and blending circuit that compensates for color and brightness differences among all of the cubes in a multi-unit configuration. |
| Smart Lamp |
| Mitsubishi's exclusive Smart Lamp™ Module in each display wall cube stores its own color characteristics. This data is the utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| Smart Colorwheel |
| Mitsubishi's exclusive Smart Colorwheel™ Module in each display wall cube stores its own color characteristics. This data is then utilized when replacing the colorwheel in one or more cubes within the display wall. Upon replacement, the cube with the new colorwheel automatically communicates that colorwheel's data with all other cubes and performs the Color Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs. |
| 12 Bit Dither & Gamma Circuit |
| Developed by Mitsubishi, the 12-bit Dither & Gamma Circuit enables the display of truly natural gradation (gray scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum color fidelity for all images. |
| Digital Gradation Circuit |
| Mitsubishi's proprietary Digital Gradation Circuit can elevate the brightness level at the edges of the screen–where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations. |
| High Contrast Ratio |
| The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DLP® chip (with dark metal coating), allow the Mitsubishi Display Wall Cubes to deliver an outstanding contrast ratio of 1600:1 (XGA models) or 1800:1 (SXGA+ models), and reproduce sharp, brilliant images with rich, vibrant colors. |
|
|
|
